H-Slide-valve vacuum pump

Suitable for pumping air and other gases general, when using gas ballast can also pump a small amount of palm condensable gases (water vapor).

DescParam CaseImages

Vacuum pump is suitable for pumping air and other gases general, when using gas ballast can also pump a small amount of palm condensable gases (water vapor). When sucking in oxygen, explosive, corrosive to ferrous metals, vacuum gas oil from a chemical reaction, should be attached to the device. This pump can be used alone, but also as diffusion pump, oil booster pumps, vacuum pumps high vacuum before the pump, relative to the rotary vane vacuum pumps, rotary piston vacuum pump more durable, long life. The pump in the vacuum coating, vacuum heat treatment, vacuum sintering, molecular distillation, aviation simulation test to use more. 

Features: 
• optimized design weight, less vibration, low noise. 
• separate bearing oil seal chamber, separated from the pump chamber to avoid the impurities into the bearing, the seal prematurely. 
• According to user requirements, with fuel tanks, oil cooling and separation of impurities role. 
• The motor is on top of the pump, compact, small footprint.

Model Limit pressure Pumping rate(L/S) Inlet Dia(mm) Outlet Dia(mm) Power(kw)
Pa Torr
H-150 1 8x10-3 150 100 80 15
H-150S 1 8x10-3 150 100 80 7.5/9/11
Automobile chemical processing applications generally leak detection metallurgical heat treatment processing PET pharmaceuticals; Transformer drying and cable fluid regulation; vacuum coating; vacuum melting.
H Slide-valve vacuum pump H Slide-valve vacuum pump1