Active Digital Controller

It is a compact single vacuum gauge controller and display. It has a clear LED display and simple push-button control. ADC can automatically identify compatible with vacuum gauge, load the appropriate look-up table, display commonly used vacuum pressure.

DescParam CaseImages

Active Digital Controller (ADC) is a compact single vacuum gauge controller and display. It has a clear LED display and simple push-button control. ADC can automatically identify compatible with vacuum gauge, load the appropriate look-up table, display commonly used vacuum pressure. There are two models available; standard ADC unit display only selected pressure, and enhanced ADC also includes a second vacuum gauge connected to two set points relays, two analog outputs and an RS232 interface. 

Features and Benefits: 
• Plug and Measure implies just plug the main power supply and connect a vacuum gauge, ADC will display the measured pressure 
• ADC supports total measuring range 2000 to 1 x 10-9 mbar (1500 到 7.5 x 10-10 Torr) of Edwards vacuum gauge 
• Bright LED display screen clearly legible even if the distance is also 
• ADC adopt mbar, Torr, Pascal as Volt display unit 
• Small 1/8 DIN chassis can be mounted in a panel or work bench 
• Simple push-button control makes the operation extremely intuitive

Active vacuum gauge compatibility

Standard

APG100、APG-L、APG-MP、APG-M、APGX-H、APGX-L、WRG

Enhanced

up to two standard versions of the vacuum gauge, plus AIM-X, AIM-S and ASG

Display

high brightness green LED display (0.47 inches high)

Units - mbar / Torr / Pa / Volts

Power supply

100 to 240V DC 47 to 63 Hz

Dimension Data

Panel cutout

92 + 0.8 x  45 + 0.6 mm(3.62 inches x 1.77 inches)to DIN43700

Panel thickness

1.5mm (0.06 inch) (minimum)

Weight

0.33Kg

Working with data storage

Operating temperature

+0 to +40°C

Storage temperature

-30 to +70°C

Maximum Operating humidity

90% RH,non-condensing at 40 ° C

Standard

Electrical safety

BS EN 61010-1

Electrical noise immunity

BS EN 61326(industrial sites, Class B emissions)

Flame retardant housing material

UL94 V1

Enclosure rating

IP40

Enhancements

Two analog outputs

0-10V DC

Two set points relay, no voltage unipolar switch

48V DC 1A / 24V DC 2A

Serial output

RS232

Used in industrial vacuum chamber, coating systems, electron beam welding apparatus; condensers in power plants, heat exchangers, steam lines, underground cables stamping; PHYSICS synchrotron beamline synchrotron radiation; scanning electron microscope, semiconductor processing, film preparation , mass spectrometry, vacuum tubes, laser processing and other fields.
Active Digital Controller