HCMS+RE series

Metallization of

interior and exterior parts

Vacuum application solution supplier
Home > Product > Automobile decorative parts coating machine
Automobile decorative parts coating machine

This series of machine combins magnetron sputtering and vacuum evaporation techniques in one machine, it adopts magnetron sputtering cathode glow discharge technique to spill atoms from the targets, then some of atoms ionized and deposit on substrates, while it can be used to get vaporized film by resistance heating material in vacuum chamber, which increase the application and flexibility of machine.

The atoms (targets) were ionized and deposited on the substrate (PVD) and vacuum by magnetron sputtering cathode glow discharge. The metal wires were melted or the metal molecules were vaporized by resistance heating method. The plastic surface was metallized. The non-conductive and electromagnetic shielding effects of the products were realized by using specific film coating.

This series of machine is equipped with plasma system, high efficient magnetron sputtering cathode and resistance evaporation systems. It has features of high deposition rate, strong adhesion, smooth and shinning coating, good uniformity etc. Machine is full automatic control, large loading capacity, reliable running, high qualified, low cost and environment protective.

Product Advantage.

HCMS+RE series automobile decorative parts coating machine includes the following key capabilities
  • integrated

    Combination of magnetron sputtering and vacuum evaporation

  • High yield

    Large loading capacity transfer to improve production capacity

  • Stable

    Reliable, repeatable and consistent

  • Good combination

    High deposition rate and good adhesion

  • Exquisite

    Fine quality and high density

  • Toughness

    Good toughness, not easy to break off

Mode HCME-1518
Size 1500×1800mm
Power supply Resistance heating tungsten wire evaporation transformer power supply, high voltage ion bombardment power supply, silicon controlled rectifier power supply
Structure Vertical double door, vertical single door, horizontal single door, air extraction system
Vacuum system Mechanical pump + roots pump + diffusion pump + maintenance pump (or option: cryogenic system)
Ultimate vacuum 8×10-4 pa(no-loading,clean chamber)
Pumping time No-loading from air to 5×10-2pa <6mins
Workpiece motion mode 6 axis/8 axis/9 axis Public rotation/Frequency control
Control mould Manual/Automatic all-in-one mode, Touching screen+PLC
Remark We can design the dimension of the vacuum chamber according to customer’s demand
Mode HCME-1820
Size 1800×2000mm
Power supply Resistance heating tungsten wire evaporation transformer power supply, high voltage ion bombardment power supply, silicon controlled rectifier power supply
Structure Vertical double door, vertical single door, horizontal single door, air extraction system
Vacuum system Mechanical pump + roots pump + diffusion pump + maintenance pump (or option: cryogenic system)
Ultimate vacuum 8×10-4 pa(no-loading,clean chamber)
Pumping time No-loading from air to 5×10-2pa <6mins
Workpiece motion mode 6 axis/8 axis/9 axis Public rotation/Frequency control
Control mould Manual/Automatic all-in-one mode, Touching screen+PLC
Remark We can design the dimension of the vacuum chamber according to customer’s demand
  • Know More Technology ?

    More
  • Need More Equipment ?

    More
  • Industry Solutions ?

    More
Would you like to know more?
Please contact us

E-mail: info@hcvac.com

Online Consultation

Submit